Remove Barrel Lock From Upvc Door

To do this you need to drill through the barrel directly under the key hole using an 8mm steel drill bit drilling a pilot hole is recomended first.

Remove barrel lock from upvc door.

Test the lock by turning the key both right and left a few times and gently tug on the key when it is turned to both. As you do so the cam will line up with the rest of the lock and you will be able to slide the cylinder out towards yourself. This will drill through the retaining lug hence the barrel will now come out. Once the door is no longer connected to the frame you ll be able to slip it out of the opening and remove the lock from the interior side.

So all you would need to do is find the screw that holds the barrel of the lock in place and tighten it. The head of the screw should be visible under the latch on edge of door. Learn if you have anti snap locks fitted and the best standard of euro cylinder lock to fit to make your locks anti snap. This will tighten the loose door handle and if done correctly your upvc door should be locking correctly and working again with no issues.

Open the door insert key to unlock and open the door. Pull out the cylinder turn the key while apply slight pressure to the opposite end of the cylinder. Remove fixing bolt cylinder is held in place by a long threaded bolt screw. Lock snapping topics we will cover on this page are.

As your key is stuck the barrel will have to be drilled out. By removing these screws you may be able to remove the lock and open the door. The gearbox is an essential part of the locking mechanism found in the door. Use a hammer and center punch to drive out the hinge pins if they are accessible.

The method of lock snapping how burglars snap the. How to change a upvc door lock. The key should be left in the lock. Only remove the key from the lock once the retaining screw is secured back into place.