Pushing the wheels up will make it easier to.
Removing sliding screen door from track.
Once you have removed the bottom of the screen door repeat the same with the upper portion of the screen door.
Taking the door out of the track 1.
Using a phillips screwdriver turn the screw counter clockwise to raise the screen up until you see the head of the screw.
Insert the screwdriver at the bottom to lift the rollers from the track.
In order to remove the door screen it must come off of the rollers.
Repeat with the other wheel then angle the bottom of the door out and remove the door.
Work a flat head screwdriver under one of the wheels lift it and angle the door slightly until the wheel clears the track.
Repeat on the other side.
Slide the door over.
How to remove your sliding screen door step 1.
To remove this type start by loosening the tension on the wheels a bit.
There s a cartridge within your screen door that contains two wheels.
To get a sliding screen door out of the track you will have to adjust the wheel screws that are located on the four corners of the door frame itself.
This cartridge can move up and down inside the screen door and is held in place by two screws.
There s an adjustment screw for each wheel near the corners of the door s frame.
Slip a flat screwdriver underneath the wheels and push them upwards.
These wheels are what allow the screen door to move along a track.
Turn the adjustment screws counterclockwise to release tension on the wheels and lower the door.
Pull the door up from the bottom track until the wheels are out.
Get a helper to lift the door.
Open the door and ask your helper to slightly lift the screen door.
To remove the screen door use a flathead screwdriver.
You ll see inner screws at the bottom of either side of the screen.
You will be able to tell the wheels are sufficiently.
These can be allen bolts phillips or flat head screws that when turned one way or the other lower or raise the runner wheels inside the door where they contact with the track itself.